FEATURES:

Agency Listings • UL Listed Control Units and Accessories for Fire Alarm Systems (UL864) Standard for Safety for Fire Protective Signaling Systems (UL1481) File# S5075. • CSFM - California State Fire Marshal Approved. File # 7315-1335:110. • MEA - NYC Department of Buildings Approved. • FM Approved. Features/Specifications Power Supply/Charger: • 24VDC output. • 10 amp max total alarm current. • 115VAC 60Hz., 4.4 amp. • Short circuit and thermal overload protection. • Built-in charger for sealed lead acid or gel type battery backup. • Maximum charge current .7 amp. • Zero voltage drop upon transfer to battery backup. • AC input and DC output LED indicators. • AC fail supervision (form "C" contact rated @ 1 amp 28VDC). • Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC). • Lifetime Warranty. Logic Board: • Class 2 Rated power limited outputs. • Two (2) Class A or two (2) Class B FACP inputs. • Two (2) NC dry contact trigger inputs. • Two (2) Class A or four (4) Class B Indicating Circuits. • Two (2) Class B outputs may be paralleled for more power on an indicating circuit. • One (1) Aux. Power Output @ 1 amp supply current (w/Battery Back Up). • Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occured on one or more signaling circuit outputs. • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate. • Horn/Strobe sync protocols include: Gentex, System Sensor, Faraday, Amseco. • Temporal Code 3 Mode. • Steady Mode. • Input to Output Follower Mode (maintains synchronization of notification appliance circuits). • March Time. • Compatible with 24VDC or 12VDC fire panels. • Common Trouble inputs and outputs. • Ground fault detection. • Lifetime Warranty. Enclosure • Accommodates up to two (4) 12VDC/12AH batteries. • Dimensions: 18"H x 14.5"W x 4.625"D. • 1/2 and 3/4 combination knockouts.

(i)Please be advised that you must enter a correct State and Zipcode, in order for the estimated shipping charges to be displayed above. Some web browsers may not be compatible with the Shipping Charges Estimator and the estimated shipping charges may NOT show-up on this page. However, the UPS shipping charges will show-up for sure on the Checkout Page (prior to entering any payment information), regardless of which web browser you are using. Please note that currently we don't offer any Free Shipping promotions, for any of our products.