FEATURES:

INPUT Connectors: XLR and 1/4" TRS (Pin 2 and tip hot) Type: Electronically balanced/unbalanced, RF filtered Impedance: Balanced > 40 kOhm, unbalanced >20 kOhm Max Input Level: > +22 dBu balanced or unbalanced CMRR: Typically >50 dB at 1 kHz OUTPUT Connectors: XLR and 1/4" TRS (Pin 2 and tip hot) Type: Servo-balanced/unbalanced, RF filtered Impedance: Balanced 30 Ohm, unbalanced 15 Ohm Max Output Level: > +22 dBm balanced, > +20 dBm unbalanced SYSTEM PERFORMANCE Bandwidth: 20 Hz to 20 kHz, +0/-0.5 dB Frequency Response: 0.35 Hz to 90 kHz, +0/-3 dB Noise: < -96 dBu, unweighted, 22 kHz measurement bandwidth Dynamic Range: > 118 dB, unweighted THD+Noise: 0.008% typical at +4 dBu, 1 kHz unity gain 0.08% typical at +20 dBu, 1 kHz, unity gain < 0.1% any amount of compression up to 40 dB, 1 kHz IMD: < 0.1% SMPTE Interchannel Crosstalk: < -80 dB 20 Hz to 20 kHz Stereo Coupling: True RMS Power Summing COMPRESSOR Threshold Range: -40 dBu to +20 dBu Ratio: 1:1 to infinity:1 Threshold Characteristic: Selectable OverEasy® or hard knee Attack/Release Characteristic: AutoDynamic™ Attack Time: Program-dependent Release Time: Program-dependent Output Gain: -20 to +20 dB LIMITER Threshold Range: 0 dBu to +24 dBu (off) Ratio: infinity:1 Limiter Type: PeakStopPlus® two-stage limiter Stage 1: PeakStop® brickwall limiter Attack Time: Zero Release Time: Zero Stage 2: Predictive intelligent program limiter Attack Time: Program-dependent Release Time: Program-dependent FUNCTION SWITCHES OverEasy®: Activates the OverEasy compression function. I/O Meter: Switches between monitoring input and output levels on the Input/Output Level meter. Bypass: Activates the direct input-to-output hard-wire bypass. OPERATING LEVEL (rear panel): Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels. ST Link: Links channels in stereo pairs. Channels One and Three become the master channels. INDICATORS Gain Reduction Meter: 8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB Input/Ouptut Meter: 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu PeakStop™: 1 LED to indicate PeakStop™ limiting Function Switches: LED indicator for each front-panel switch OPTIONS - Output Transformer Per Channel: Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx POWER SUPPLY Operating Voltage: Switchable: 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz Power Consumption: 20 Watts Fuse: 100-120 VAC:250 mA Slow Blow 200-240 VAC:125 mA Type T Mains Connection: IEC receptacle PHYSICAL Dimensions: 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm) Weight: 5.2 lbs. (2.4 kg) Shipping Weight: 7.6 lbs. (3.5 kg)

(i)Please be advised that you must enter a correct State and Zipcode, in order for the estimated shipping charges to be displayed above. Some web browsers may not be compatible with the Shipping Charges Estimator and the estimated shipping charges may NOT show-up on this page. However, the UPS shipping charges will show-up for sure on the Checkout Page (prior to entering any payment information), regardless of which web browser you are using. Please note that currently we don't offer any Free Shipping promotions, for any of our products.